Table of Contents

Pitch Knob

[Graphic]

Dial the Pitch Knob to set pitch. Pitch is measured as a percentage of the original pitch of the sample. Changes to pitch are made by speeding up or slowing down play back. Wiggle the pitch to do something like scratching. Pitch runs from 1% to 400%. The value is displayed in the status bar.

Right dial to make finer adjustments.

Double clicking sets pitch to 100%, i.e., to normal play back speed.

Note: changes to the Gang are transmitted to all LoopTracks controlled by the Gang. Changes to the master LoopTrack in a blocked Band are transmitted to all LoopTracks in the Band.

Also see: Doing Things with LoopTracks





last modified 10-29-200